Phenol Red Testing Tablets (100 Tablets)
-
Phenol Red Testing Tablets (100 Tablets)
Aspects Pools and Spas
Review this store
Water Testing
These tablets are used in conjunction with a testing kit to test for pH levels in your swimming pool.
RRP £1.00
£7.00
Visit Store »
Similar Products
 
|
Aquachek Chlorine/ph/total Alkalinity/cyanuric Acid Test Strips (pack Of 50 Strips) Water Testing Tests for Free Chlorine, Cyanuric Acid, pH and Total Alkalinity50 strips per bottleJust dip an AquaChek Yellow strip in your pool or spa water for one second, and remove it immediately. You get test results in seconds! To keep your pool at its best, test at each end at least twice a week, and test your spa before each use. It's also a good idea to write down your results each time you test, so you can track changes.Comes with complete instructions in 15 languages: English, French, Spanish, Italian, Czech, Danish, Dutch, German, Greek, Hungarian, Polish, Portuguese, Russian, Swedish and Turkish. RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£9.00 |
Visit Store » |
|
Aquachek Trutest Digital Test Strip Reader Water Testing Tests for Free Chlorine/Bromine, pH and Total AlkalinityGet the best of both worlds — the ease and accuracy of AquaChek test strips, plus advanced digital technology. Just dip the test strip in your pool or spa, insert the reader, and get fast, accurate results in seconds. You'll enjoy:- Fast, accurate results in 15 seconds with technology designed specifically for pool and spa analysis — and no more color matching- A large, easy-to-read LCD screen that displays test resultsOther features of the TruTest Digital Test Strip Reader:- Numerical test results and low, ok, or high indicators for:    - Free Chlorine/Bromine    - pH    - Total Alkalinity- Water-resistance- Memory function — the reader stores the last 9 test results- Simple power source: 2AA alkaline batteries (not included)- Sixty (60) day limited manufacturer's warrantyKit Includes:- TruTest Digital Test Strip Reader- User's guide in 15 languages- Pool Care and Treatment Information- 25 TruTest Digital StripsHow does it work? FAQs for AquaChek® TruTestâ„¢ Test Strip Reader Q: What can I expect for the precision of the test parameters? A: The precision of the unit can be reported as the following: * FC, 0-1ppm range +/- 0.3ppm : 3-10ppm range +/- 1ppm * pH, entire range +/- 0.1pH * TA, entire range +/-30ppm It can be noted that as with any test, technique consistency will improve precision results. Q: What is the dynamic test range for the TruTest? * FC, 0-15ppm * pH, 6.1-8.8 * TA, 0-300ppm It should be noted that the Er messages will be displayed when testing pool samples outside of these calibrated test ranges (reference in the manual). Q: Can I compare the TruTest results to other test methods? A: The accuracy of the unit should only be compared to visual test methods. This is because the unit is capable of reporting numerical results between colorblocks and therefore the unit can be considered to be more accurate than a visual colorimetric evaluation (involving both human interpretation and interpolation). Digital readout in place of color interpretation is TruTest’s main benefit resonating with many pool/spa owners. Q: How long will the batteries last? How long will the unit last? A: The AA batteries should last an entire pool season’s worth of testing. The display window will flash “LO†if the batteries are below a certain level of power needed to perform a test. The unit has been developed for the consumer’s pool environment. With good cleaning and storage habits, the meter should last longer than 3 years. Q: Why does the unit sometimes not appear to stay “ONâ€? A: The “on†button if depressed quickly on and off can cause conflicts with the software, appearing to not “stay on (or off)â€. Simply waiting a minute or so before pressing the ON button should help clear the cycle. Q: What does LO in the TA location of the TruTest meter display mean? A: The meter displays LO in the TA location when the battery voltage drops below the permissible limit. Start and Scroll functions are disabled and the meter turns off automatically within 3-5 seconds. Even if the meter is turned ON again, it would turn off after displaying LO. If a low battery condition is detected during the Test/Run cycle, instead of pool values the meter returns a LO on display at the TA location and turns off. Q: How should I be cleaning my TruTest? A: A simple, non-abrasive wiping of the test strip window and all other surfaces with clean, fresh water should clear any residual chemicals remaining from pool testing. Q: What will happen if the meter falls into the pool/spa? A: The meter was designed to withstand this kind of accidental submersion and should float upon entry into the water. Simply remove the meter, take out the batteries from the battery compartment, dry the battery compartment thoroughly and replace with dry batteries. The meter should return to full performance. Q: Should I “place†or “slide†the test strip onto the test strip window? A: It is very important that you do not slide the test strip on the window. This action will result in inaccurate readings. A simple method is to place the first pad nearest the top of the strip onto the window first, then lower the rest of the strip down onto the window. This will ensure that the strip is all the way in and down onto the window. Error Messages If ER appears in place of a numerical value – the test result is out of range. The parameter is either too high or too low to be accurately analyzed. Note the status level, LO or HI to determine how to treat your water. Re-test after treatment. If ER2 appears on the screen – there is an error in reading the test strip. Ensrue that you are following the test procedure correctly. Use only AquaChek® TruTest instrumental test strips. No other test strip can be used. If ER3 appears on the screen – no strip is in place or the test strip is positioned incorrectly. The correct position is with the test pads face down in the slot with the top pad all the way to the top. Test Strip Use The AquaChek® TruTest test strips are calibrated to work only with the AquaChek® TruTest test strip reader. Each strip may only be used once. Do not re-dip the strip. Only dip the strip in calm areas of your pool or spa. Ensure you have a fresh supply – keep cap on tight between uses and store at room temperature. RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£57.00 |
Visit Store » |
|
Aquachek Trutest Test Strips - Refill X 50 Water Testing For use with AquaChek TruTest Digital Test Strip Reader. Tests for Free Chlorine/Bromine, pH and Total Alkalinity. 50 strips per bottle. RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£12.00 |
Visit Store » |
|
Aquachek Bromine/ph/total Alkalinity/total Hardness Test Strips (pack Of 50 Strips) Water Testing Special Offers Tests for Total Bromine, pH, Total Alkalinity and Total Hardness50 strips per bottleJust dip an AquaChek Red strip in your spa (hot tub) or pool for one second and remove it immediately. You get test results in seconds. It couldn't be easier!To keep your spa at its best, test the water before each use. Test your pool at each end, at least twice a week. It's also a good idea to write down your results each time you test, so you can track changes over time.Comes with complete instructions in 15 languages: English, French, Spanish, Italian, Czech, Danish, Dutch, German, Greek, Hungarian, Polish, Portuguese, Russian, Swedish and Turkish. RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£6.00 |
Visit Store » |
* Must be complete