6kw Elecro Evolution Titanium Premium Electric Pool Heater
-
6kw Elecro Evolution Titanium Premium Electric Pool Heater
Aspects Pools and Spas
Review this store
Electric Swimming Pool Heaters Elecro Evolution Titanium Premium Electric Pool Heater
The titanium model is corrosion resistant allowing the heater to be used on salt water and corrosive chemical systems. The Elecro TiTANIUM swimming pool heater is the latest addition to Elecros product range. As with the stainless steel model all units come fully equipped and pre-wired with a highly sensitive flow switch, control thermostat, high limiting safety thermostat & integral contactor / relay. The main difference is that the tank & element(s) are now being produced in Pure Titanium. The heaters are very easy to install requiring only a final connection to a mandatory seperate RCD. No pump interlock is required. 3kW to 9kW heaters come fitted with 1.5 BSP female threaded adaptors and 1.5 to 1.25 hosetails. 12kW to 18kW heaters are also supplied with the above hosetails and 1.5 socket unions. The decision was made to produce in Titanium for a number of reasons, not only for it's super strength but also for it's outstanding corrosion & erosion resistant properties. The reason that Titanium is so tough in comparison to all other metals is that it is completely non-reactive, this means that the Titanium heater is also suitable for heating acids or virtually any liquids. The Titanium heaters are as easy to install as the stainless steel model, all heaters are fitted with 1½'' BSP female threaded adapters for easy connection to any pipework. All heaters are supplied with hosetail adapters for connecting to flexible pipework, heater sizes 12-kW through to 18-kW are also supplied with 1½'' BSP unions for connection to rigid pipework. Key Features Pure Titanium Flow Tube & Heating Element(s) A Thermostat You Control Separate Safety Thermostat Integral Contactor / Relay Reversible Flow Switch - Allowing water input from either direction 1 phase
RRP £1.00
£360.00
Visit Store »
Similar Products
 
|
24kw Elecro Evolution Titanium Premium Electric Pool Heater Electric Swimming Pool Heaters Elecro Evolution Titanium Premium Electric Pool Heater The titanium model is corrosion resistant allowing the heater to be used on salt water and corrosive chemical systems. The Elecro TiTANIUM swimming pool heater is the latest addition to Elecros product range. As with the stainless steel model all units come fully equipped and pre-wired with a highly sensitive flow switch, control thermostat, high limiting safety thermostat & integral contactor / relay. The main difference is that the tank & element(s) are now being produced in Pure Titanium. The heaters are very easy to install requiring only a final connection to a mandatory seperate RCD. No pump interlock is required. 3kW to 9kW heaters come fitted with 1.5 BSP female threaded adaptors and 1.5 to 1.25 hosetails. 12kW to 18kW heaters are also supplied with the above hosetails and 1.5 socket unions. The decision was made to produce in Titanium for a number of reasons, not only for it's super strength but also for it's outstanding corrosion & erosion resistant properties. The reason that Titanium is so tough in comparison to all other metals is that it is completely non-reactive, this means that the Titanium heater is also suitable for heating acids or virtually any liquids. The Titanium heaters are as easy to install as the stainless steel model, all heaters are fitted with 1½'' BSP female threaded adapters for easy connection to any pipework. All heaters are supplied with hosetail adapters for connecting to flexible pipework, heater sizes 12-kW through to 18-kW are also supplied with 1½'' BSP unions for connection to rigid pipework. Key Features Pure Titanium Flow Tube & Heating Element(s) A Thermostat You Control Separate Safety Thermostat Integral Contactor / Relay Reversible Flow Switch - Allowing water input from either direction 1 phase RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£690.00 |
Visit Store » |
|
2kw Elecro Evolution Titanium Premium Electric Pool Heater Electric Swimming Pool Heaters Elecro Evolution Titanium Premium Electric Pool Heater The titanium model is corrosion resistant allowing the heater to be used on salt water and corrosive chemical systems.The Elecro TiTANIUM swimming pool heater is the latest addition to Elecros product range. As with the stainless steel model all units come fully equipped and pre-wired with a highly sensitive flow switch, control thermostat, high limiting safety thermostat & integral contactor / relay. The main difference is that the tank & element(s) are now being produced in Pure Titanium.The heaters are very easy to install requiring only a final connection to a mandatory seperate RCD. No pump interlock is required.3kW to 9kW heaters come fitted with 1.5 BSP female threaded adaptors and 1.5 to 1.25 hosetails. 12kW to 18kW heaters are also supplied with the above hosetails and 1.5 socket unions.The decision was made to produce in Titanium for a number of reasons, not only for it's super strength but also for it's outstanding corrosion & erosion resistant properties. The reason that Titanium is so tough in comparison to all other metals is that it is completely non-reactive, this means that the Titanium heater is also suitable for heating acids or virtually any liquids. The Titanium heaters are as easy to install as the stainless steel model, all heaters are fitted with 1½'' BSP female threaded adapters for easy connection to any pipework. All heaters are supplied with hosetail adapters for connecting to flexible pipework, heater sizes 12-kW through to 18-kW are also supplied with 1½'' BSP unions for connection to rigid pipework.Key FeaturesPure Titanium Flow Tube & Heating Element(s)A Thermostat You ControlSeparate Safety ThermostatIntegral Contactor / RelayReversible Flow Switch - Allowing water input from either direction1 phase RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£295.00 |
Visit Store » |
|
18kw Elecro Evolution Titanium Premium Electric Pool Heater Electric Swimming Pool Heaters Elecro Evolution Titanium Premium Electric Pool Heater The titanium model is corrosion resistant allowing the heater to be used on salt water and corrosive chemical systems. The Elecro TiTANIUM swimming pool heater is the latest addition to Elecros product range. As with the stainless steel model all units come fully equipped and pre-wired with a highly sensitive flow switch, control thermostat, high limiting safety thermostat & integral contactor / relay. The main difference is that the tank & element(s) are now being produced in Pure Titanium. The heaters are very easy to install requiring only a final connection to a mandatory seperate RCD. No pump interlock is required. 3kW to 9kW heaters come fitted with 1.5 BSP female threaded adaptors and 1.5 to 1.25 hosetails. 12kW to 18kW heaters are also supplied with the above hosetails and 1.5 socket unions. The decision was made to produce in Titanium for a number of reasons, not only for it's super strength but also for it's outstanding corrosion & erosion resistant properties. The reason that Titanium is so tough in comparison to all other metals is that it is completely non-reactive, this means that the Titanium heater is also suitable for heating acids or virtually any liquids. The Titanium heaters are as easy to install as the stainless steel model, all heaters are fitted with 1½'' BSP female threaded adapters for easy connection to any pipework. All heaters are supplied with hosetail adapters for connecting to flexible pipework, heater sizes 12-kW through to 18-kW are also supplied with 1½'' BSP unions for connection to rigid pipework. Key Features Pure Titanium Flow Tube & Heating Element(s) A Thermostat You Control Separate Safety Thermostat Integral Contactor / Relay Reversible Flow Switch - Allowing water input from either direction 1 phase RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£650.00 |
Visit Store » |
|
9kw Elecro Evolution Titanium Premium Electric Pool Heater Electric Swimming Pool Heaters Elecro Evolution Titanium Premium Electric Pool Heater The titanium model is corrosion resistant allowing the heater to be used on salt water and corrosive chemical systems. The Elecro TiTANIUM swimming pool heater is the latest addition to Elecros product range. As with the stainless steel model all units come fully equipped and pre-wired with a highly sensitive flow switch, control thermostat, high limiting safety thermostat & integral contactor / relay. The main difference is that the tank & element(s) are now being produced in Pure Titanium. The heaters are very easy to install requiring only a final connection to a mandatory seperate RCD. No pump interlock is required. 3kW to 9kW heaters come fitted with 1.5 BSP female threaded adaptors and 1.5 to 1.25 hosetails. 12kW to 18kW heaters are also supplied with the above hosetails and 1.5 socket unions. The decision was made to produce in Titanium for a number of reasons, not only for it's super strength but also for it's outstanding corrosion & erosion resistant properties. The reason that Titanium is so tough in comparison to all other metals is that it is completely non-reactive, this means that the Titanium heater is also suitable for heating acids or virtually any liquids. The Titanium heaters are as easy to install as the stainless steel model, all heaters are fitted with 1½'' BSP female threaded adapters for easy connection to any pipework. All heaters are supplied with hosetail adapters for connecting to flexible pipework, heater sizes 12-kW through to 18-kW are also supplied with 1½'' BSP unions for connection to rigid pipework. Key Features Pure Titanium Flow Tube & Heating Element(s) A Thermostat You Control Separate Safety Thermostat Integral Contactor / Relay Reversible Flow Switch - Allowing water input from either direction 1 phase RRP £1.00 Review this product |
Review this store Aspects Pools and Spas |
£440.00 |
Visit Store » |
* Must be complete